Thought the resources for GPU arch were lacking, so here we are

I worked on deep sub-micron, full custom mixed-signal integrated circuits for more than a decade, and I can't pass the first level.

> Wire an NMOS transistor so that when In is 1, the output is pulled to ground (0). When In is 0, the output should be unconnected (Z).

Certainly:

(a) The nMOS has 3 connections: its drain is only connected to the output (no +Vdd supply), it's source is tied to ground, it's gate is tied to the signal input

(b) When the gate (input) is driven high, the nMOS transistor turns "on," connecting the output to the source (which is grounded). This acts as a "pull-down network"

(c) When the gate is driven low, the nMOS turns "off," leaving no connection to the output. This is equivalent to a "high-impedance" / "unconnected" / "Z" output

Fails 1/2 tests

(Edit) - I thought the light grey, thick line on the background grid was a wire from "input" to the transistor's gate. It is not. You need to explicitly add a wire from "input" to gate :\

first level is impossible to solve for me! Hint or showing solution did not work! Also adding multiple sources or ground behave differently than connecting to the same.

This is great!

Some comments:

- I didn't like the "truth tables" one, I got many duplicate questions and for some reason I got only one second for the first question. The rest of the questions I managed to answer correctly but I still got only one start out of three?

- I got very confused by the capacitor. Capacitors do not have an "enable" gate! In fact, in 2.7 (1T1C) you are supposed to build the enable gate -- with a transistor. So currently, you can just simply not build the enable gate and use the one already in the primitive, meaning you don't need the NMOS gate at all.

Was this made using LLM-assistence? (Not judging, I'm just interested!) I'd love to hear more about your workflow and how you managed to produce a good UI as it's something I couldn't do if my life depended on it, and it's a skill I'd like to learn.

Anyone who likes this should also take a look at: https://store.steampowered.com/app/1444480/Turing_Complete/ At the end you have your own CPU with your own assembly language. Sadly stuck in early access since forever with some very rough edges

This looks really cool, although I personally seem to lack the absolute basic knowledge that is required to make sense of the tutorial messages, so I couldn't even figure out the first level.

Neat idea!

Ive added this to the HN Arcade! https://hnarcade.com/games/games/mvidia

You need to have a, "Okay, I've tried 10 times, it's not working, what's the answer?" button. That will help not just us rubes who can't understand, but also in the off chance something is broken and even "correct" answers are being rejected.

Huge fan of this! I love learning-by-doing and this captures that cycle perfectly.

This is super cool but part of me wishes I could skip to the later levels rather than redo college homework from a decade ago. Maybe that ruins the fun but also slogging through the early levels (especially when the UI is a bit rough around the edges and doesn't support copy paste) isn't fun either.

That was great fun, an interactive refresher on my EE studies. Thank you so much for creating it.

If anybody can create something similarly interactive, educational and hands-on for microbiology or robotics, I am happy to sponsor your cost.

as a learning resource, it would be great it acronyms were expanded at least once. nmos, pmos, gnd, vdd all in the first 5 seconds or so, and i didnt see anywhere that actually said what those stood for

otherwise, looks polished and fills in a nice niche!

Great game! For learning, might be nice to see some commentary or example (model) solutions after beating a level.

I'm confused about a difference in the NMOS and PMOS. The scenario I'm confused about is when the source is VDD and the drain is connected to GND and output.

For the PMOS, the output toggles between 1 and 0 (opposite the gate) as expected. However, for the NMOS, the output is always 0.

I don't understand why GND pulls VDD down to 0 for the NMOS, but not the PMOS.

Hi everyone, commenting to address feedback:

- Made timed minigames optional (e.g. binary tables)

- Added 7 (optional) intro levels to walk through pmos and nmos transistors

- Fixed the bug in the capacitor levels

- Changed editor bg to use dots instead of lines to fix wire confusion

The truth tables are way too hard for me. I need time to think and the 10 seconds is way too fast. If this is intended to be a teaching resource, avoid timers IMHO. It needlessly excludes people.

Must be missing something - is there a way to save progress?

The 2.13 level ("hex racer") is kind of pain. Apparently I'm not fast enough at dividing/multiplying by 16... when I get something like "convert 0xB3 to decimal"

love it, some level (full adder with 8 inputs) where a bit repetative, but it is fun.

if you solve a level, then press "next level", then solve that next level - then it still shows the original level (I think it just gets hidden below the new one and then reappears after a solve?)

This would be such a good game for introducing students to digital technology! This is so fun! We just had to draw them by hand back in the dark ages of the 2010s.

A nice game, though the truth table lighting round is pretty punishing! Big contrast to the circuit building part where you can take your time. Personally I'd drop the time requirements from that quiz section.

Is this a sequel to "How to make a CPU"? https://www.youtube.com/watch?v=vuvckBQ1bME

Any easy way to make this usable on mobile? In portrait mode things are unreadable, zoom and scrolling do not work. Landscape is even worse as everything is out of view (and zoom/scroll do not work).

This is awesome! The truth table lightning round took me by surprise, I am rustier than I thought...

One note: It isn't immediately obvious that the In/Out nodes can be connected to multiple wires, made the first few rounds harder to work thru.

The “next level” button takes you to the next level even if you haven’t solved that level’s prerequisites.

It's always nice to see educational games like that. A lot of new learners (like me) are just looking at the high level stuff, where the computer "just works"...

Well done and keep it up :)

The continue buttons in intro break for me all the time on Firefox. I can't actually finish most of them.

So, is there anything about GPU's in here right now?

I didn't actually finish Act 2, but it seems to end in a conventional processor with the GPU first coming after another two acts currently under construction.

Awesome project! Reminds me of Turing Complete on Steam.

really fun :) thanks!

Fun. 2.2 loads a blank screen for me, all previous levels were fine and 2.3 loads. Windows, Firefox 149.

Edit: Confirmed fixed.

Great project! I somehow missed whole cpu architecture topic, so gonna catch up on that now

truth table minigame is lmost unplayable in dark mode

also it kept showing the same table to me like 4 times

I like the concept! What tools did you use to build it?

Soooo cool! I will keep try this

Love it, thanks! Would you mind making it possible for me to see my "circuit" after running the tests? Currently, I can't go back to the circuit I created.

Reminds me of http://nandgame.com and https://nand2tetris.org

level 1.10 I put 2 AND gates and only one of them works...

Cool concept, but it should be mobile friendly

În a few years it will be the only way to explain the kids what a GPU is. Unless you work for an “AI” shop and sneak them into the data center.

how do I remove/delete elements?

This is very cool!

We need more games like this so that the younger population get some sort of exposure to the hardware side of things, before AI takes over that field. I would also think that take-home electronic and soldering kits for adults and younger folks would be another way to reduce dependance on AI.

...why capacitor has 3 pins ?

wow looks really cool, although seems kinda useless at first look.

not playing past the truth tables bs