Cool project! My business is Better Geiger (www.bettergeiger.com), I design and sell radiation detectors. I just hope people keep in mind the capabilities and limitations of those simple Geiger tubes. Radon was mentioned on the project website, yes technically radon decay products are detectable but pracfically a Geiger tube is reacting only to terrestrial, cosmic, and other sources of radiation, not anything to do with radon. Measuring radon generally requires a dedicated device (I recommend ecosense, at least until I get around to designing one). You correctly noted that such a tube can't accurately measure dose, that's because it is not energy compensated, so usually such a tube has a count to dose conversion factor for Cs-137 that will cause major overestimation in realistic scenarios. Those cheap tubes of that type also saturates easily in radiation fields that are really hazardous, making it fairly useless in an emergency situation. That is the main distinguishing feature of my products, high range and energy compensated. I have put out some YouTube videos that go into more detail about radiation dose, fallout and how to reduce risks, etc. I've given a lot of thought to doing a project like this with a scintillator, but I don't think the demand is there for me to do it before a lot of other ideas I have... When a cheapo standalone Geiger tube device can be had for $50, my products with scintillator go for $150 or $200 for the very high sensitivity version, then for $250-600 there are a few gamma spec products like radiacode, raysid, and radview with varying other features that are fun for hobbyists (though be aware none of those go to high dose rate range). For hackability mine offers access to the digital and analog outputs, but it's not really made for gamma spec so the spectrum quality is poor, but it can be a fun way to play. I've given a lot of thought to something designed more for DIY people, but in my experience very few people actually want that, most just want plug and play, and the ones that do request it usually don't even follow through. I've only communicated with a couple people that actually pulled a spec from a better geiger. Maybe that would be different if I designed a device specifically for DIY, something really small with simple serial comm output or something like that... Maybe some day.

Read above now and twice on Sunday.

I love the idea of using the tube and measurements as a random number generator! However, please treat the whole category of homemade devices to measure/detect "bad shit" as novelty and nothing else. If you are actually concerned enough to really measure/detect harmful materials, buy the proper devices. Learn how to calibrate and how to use them properly. The last thing our 911 system needs are people calling with aliexpress radiation detectors going off in a cancer center.

I would really like to have a geiger counter that I can put on the wall and connect to Zigbee/Z-Wave/WiFi and tie into Home Assistant. I've considered building one with the cheaper tube and ESP32, but I'm surprised that for Radon and radiation, it seems like something like AirGradient, but for radioactivity, doesn't exist.

> Radon was mentioned on the project website, yes technically radon decay products are detectable but pracfically a Geiger tube is reacting only to terrestrial, cosmic, and other sources of radiation, not anything to do with radon.

To measure radon (say in a cellar), you'd typically take some dust filter or filter foam, attach it to a fan and circulate the cellar air through the filter, then the radioactive dust collects in the filter, and one can measure higher doses more easily.

Amazing! Great work.

Random question for you in the biz: where can I get a muon detector setup? I just can't find them anywhere and would love to gain access to the extraterrestrial and solar weather particle environment.