| ▲ | modeless 6 hours ago |
| Yeah, it's not clear to me why people are just taking it as gospel that this will improve competitiveness. IMO it seems like it would lead to stagnation as it becomes more difficult for a single company to change anything. |
|
| ▲ | AngryData 5 hours ago | parent | next [-] |
| I think it very much depends on how this is implemented. Some things simply don't need to have design changes almost ever because it it is a solved problem. Some things just need to share attachment points to be swapped with other or better versions. Like why do we need 20 different oil filter styles for 20 different cars? Why is one car battery 1/2 inch longer so it doesn't fit in another cars battery tray despite being the same capacity? Why do we need 20 different tierod ends on 20 different cars when a single design would work with 80% of them? |
| |
| ▲ | dmurray an hour ago | parent [-] | | Several commentators mention batteries. Is this an issue in the US? In Europe every car I've had has had roughly interchangeable batteries. There might be two or three different sizes for family petrol cars. That seems like a reasonable amount of useful variation for manufacturers to choose between when playing Tetris with all the components they need to fit alongside the engine. |
|
|
| ▲ | rootsudo 6 hours ago | parent | prev | next [-] |
| Agree and disagree, a framework of standardized motor and frame, unibody or frame on body would be great. Do we really need a new car to look cosmetically different every few years to spur sales and say “new?” At the same time this means they can still customize the sheet metal, for different trims and types but the motor is the same, transmission is the same, seat is the same, etc And for those parts, do we really need new part numbers every year? Heterogeneous is great? But something something Henry ford you can have any color as long as it’s black is also ok. Plus it isn’t really new, brand engineering is this. Toyota grabs the bmw z4 and makes it a Supra, Mazda grabs the rav4 and makes it the cx50, etc |
| |
| ▲ | MBCook 5 hours ago | parent | next [-] | | Tesla has basically proven the answer is no. And personally I think most cars have been getting uglier. I would’ve been happy if they stuck with what they had 10 years ago. So yeah, if you wanna save money, stop wasting it on a new redesign every few years. Don’t waste the money retooling to change random things every year. | | |
| ▲ | jeffreygoesto 4 hours ago | parent | next [-] | | Trabant and Wartburg also have, long ago ;). | | |
| ▲ | numpad0 an hour ago | parent | next [-] | | Those and 911 had proven it's an ok engineering decision and a commercial suicide at the same time. | |
| ▲ | poisonborz 4 hours ago | parent | prev [-] | | ^ This commenter enjoys real cars |
| |
| ▲ | bdangubic 5 hours ago | parent | prev [-] | | Tesla is an example of an actual opposite. Their best-selling model is the last one released, the refreshed Models Y and 3. Ones they try to keep selling year after year have been discontinued. | | |
| |
| ▲ | bigfatkitten 4 hours ago | parent | prev | next [-] | | Car manufacturers have been doing this since the early 1900s. They call these designs “platforms” or “vehicle architectures.” They might do a cosmetic facelift every couple of years but the platform will typically stay in production for a decade or so. GM in particular are famous for using the same chassis, drivetrain, floorpan etc on half a dozen or more models across their marques. | |
| ▲ | 14 5 hours ago | parent | prev | next [-] | | For me someone who does most of my car maintenance and repairs this would be very attractive knowing that parts were standardized and by doing so would guarantee that there would be a huge aftermarket parts marker since one part could target multiple models and this would mean competitive prices thus lowering the cost of repairs. Still, however, as great as cheap available parts would be.. the major car brands desperately need to find ways to significantly lower the price of their cars. New cars and trucks are reaching the prices of like a big down payment you could put on a house. Standardized parts would definitely reduce costs but would that be enough? Even many 2 income households struggle to get ahead.
In my opinion the number one priority of these companies should be how can they make an inexpensive car that the average person can afford. | | |
| ▲ | BoingBoomTschak 2 hours ago | parent [-] | | Well, at least in Europe, the cost problem may be due to regulations and safety gimmicks. Look into the madness of GSR2. |
| |
| ▲ | ExoticPearTree 4 hours ago | parent | prev | next [-] | | > Do we really need a new car to look cosmetically different every few years to spur sales and say “new?” The problem that I have with cars in general is that they use pretty old technology and you want something new that actually works OK and it does not have that much lag. While I understand the myth about manufacturers using old components because they are proven, they should get over it and use circuits made in the 21st century. Reliability has grown a lot, we don't need vacuum tubes in the cars anymore (I am being sarcastic about the vacuum tubes). Another thing is the subtle but annoying differences in cars in different geographies: in one country you have a 360-degree camera system, but in others they don't even offer it as an add-on. For the same car. And other little things. What I would like to see though would be to have the ability to upgrade the hardware in the car every 2-3 years. Like replace 2-3 "boxes" full of components and have "an almost new car" with improved technology. | | |
| ▲ | fc417fc802 3 hours ago | parent | next [-] | | > Reliability has grown a lot, we don't need vacuum tubes in the cars anymore (I am being sarcastic about the vacuum tubes). This is a rather unenlightened take. The electronics used in cars aren't typical consumer gear - the parts are much more rugged. This is for good reason. The same car could start life parked on the side of the road in the nevada desert (wild temperature fluctuations), go on a roadtrip through death valley in the summer, and a few years later be parked on the street in florida (ridiculously humid) or somewhere in north dakota (extreme cold). Meanwhile we expect not to have any major electrical issues over a 20+ year product life. It's actually fairly absurd when you stop and think about it. | |
| ▲ | marcta 4 hours ago | parent | prev [-] | | I'd prefer them to keep using the old parts if they work. That way I am more likely to be able to take it to an independent garage who will have compatible parts, rather than taking it to the dealership & paying a premium as well as waiting for ages for them to ship the brand new part in. |
| |
| ▲ | lazide 5 hours ago | parent | prev [-] | | For them to stay competitive as independent companies? Of course! Otherwise they look identical and have the same parts, and their only competitive difference is what? Pricing? On the same parts? They might as well merge now and save the drama. | | |
| ▲ | VorpalWay 5 hours ago | parent | next [-] | | If they standardize internal components like tie rods, wheel bearings and battery trays, I doubt anyone would think the cars look the same. In fact, I think this would be great: standardise the jelly bean parts that don't really change much and don't see much innovation. There is absolutely no reason that different cars should use different incompatible 12 V batteries when the capacity is identical. | |
| ▲ | jnellis 4 hours ago | parent | prev | next [-] | | > Otherwise they look identical Hasn't this ship already sailed? | |
| ▲ | lelanthran 4 hours ago | parent | prev [-] | | > For them to stay competitive as independent companies? Of course! Otherwise they look identical and have the same parts, and their only competitive difference is what? Pricing? On the same parts? What makes you think they'd look identical? You think the only parts in a car are cosmetic parts? |
|
|
|
| ▲ | powerapple 3 hours ago | parent | prev | next [-] |
| For most parts, they are actually just (unnecessarily) designed to be not compatible so that the manufacturer will take profit from parts as well. Incompatibility becomes a feature for profit, not for anything else. This might actually be good for competition because now a small company can start with less money and standardized parts and focus on things they can actually make a difference. |
|
| ▲ | WalterBright 4 hours ago | parent | prev | next [-] |
| Ferrari would use parts from other car companies. What Ferrari cared about was the engine. |
| |
| ▲ | hinkley 4 hours ago | parent [-] | | Part of the reason Japanese cars had trouble getting a toehold in the Midwest is that American cars already had suppliers in common so it was more likely they had a set of rotors for your random Ford and they had to order them for your Subaru. That was also before people read some of the books on supply chains so those orders took longer. |
|
|
| ▲ | mahirsaid 3 hours ago | parent | prev [-] |
| if the US market thought it can compete or win certain markets then the door would be open.
FOR:
Smartphone,
Software,
AI models,
EV Cars,
Routers,
etc, The reason is because Cybersecurity is a priority for us and the Chinese are spying on us blah blah.
I know for sure that cybercrime was no where as frequent as today, and with that not only is it from china anymore along with a much larger scale of intrusion and theft. |
| |
| ▲ | wurstburst 3 hours ago | parent [-] | | Is laughable seeing people from the US blaming their incompetence accusing others. The thing is that China entered in your capitalized game and won. Accusing any one of spying as a justification for your failures is kind of ridiculous. The all powerful US creates sanctions, extreme protectionist and a lot of economic obstacles for everyone. You guys are living in a dystopian world for ages. Your “free market” and free competition is an hallucination that you decided to believe. The disasters the World had to accept in favor of the US “superiority” are far more terrible than you not being able to compete with EV. |
|