| ▲ | mitchweaver 7 hours ago |
| (poorly). People dedicate entire careers to things like CAD — yet they somehow crammed it all into part of one lecture which seems to be little more than an enumeration of 50 different CAD tools. The use of lowercase throughout doesn't inspire much confidence either. |
|
| ▲ | thomascountz 6 hours ago | parent | next [-] |
| You have to begin somewhere. Going breadth-first instead of depth-first is a pedagogical choice and a good motivator which was less possible 20 year ago. Now, more than ever, being a generalist means you can actually make something end-to-end, and making doesn't mean you need a professional machinist, industrial designer, or firmware engineer. Finally, this is a practical, not a lecture-based course. Most of what's learned is in the lab where you're expected to work and problem-solve. If you look at the student portfolios from over the years, I'd say this course has done a lot of good taking this approach. |
|
| ▲ | pastel8739 6 hours ago | parent | prev | next [-] |
| Making things poorly is a lot more interesting than not making them at all. And then you know who to ask when you need part of it done well. |
|
| ▲ | gadsdengrappler 6 hours ago | parent | prev | next [-] |
| A bit harsh. I don’t think anyone is expecting they can waltz out of this course ready for a career in CAD. It is intended for students coming from a wide range of backgrounds including non-technical, so a whirlwind tour of the fundamentals of many different fab and design tools is perfect. Cross-disciplinary awareness and curiosity is rarely a bad thing. |
| |
| ▲ | mitchweaver 5 hours ago | parent [-] | | Harsh? Hardly. This is like taking a "tour the crayon factory" episode of Mr. Rogers and making a college-level course out of it, but through the eyes of open source evangelist MIT-types. In fact they would probably learn more from those old PBS shows meant for children, minus some right to repair propaganda thrown in for good measure. | | |
| ▲ | thomascountz 3 hours ago | parent | next [-] | | We don't have to agree, but I think your comment is a little harsh. I think it's harsh because you've qualified "poor" as a thing to be avoided without without understanding its purpose and history, or engaging with prior students' final projects and their motivations.[1] Even if you had, you seem to hold some beliefs about the Maker Movement and maker culture[2] (and higher education in general) that are incompatible with the course's aims. That makes your judgment harsh and unqualified. I may be missing what an alternative would look like. Surely we shouldn't try to make digital manufacturing less accessible. Students pursuing degrees in industrial design, mechanical engineering, media arts, and other fields should get hands-on, cross-disciplinary exposure, shouldn't they? I'm struggling to imagine how we could take a different approach and achieve comparable outcomes. How would you ever learn something if you're not allowed to be a beginner? [1]: Start here: https://pub.cba.mit.edu/863.26/site/file/prior.html [2]: See: https://en.wikipedia.org/wiki/Maker_culture | |
| ▲ | elcritch 4 hours ago | parent | prev | next [-] | | Except it looks like these students are expected to create at least basic items. There's likely a lab component. | |
| ▲ | cedijec334 2 hours ago | parent | prev [-] | | Accurate if Mr Rogers had been friends with the most notorious pedophile in history.
https://epsteintransparencyact.com/people/neil-gershenfeld/ |
|
|
|
| ▲ | haunter 4 hours ago | parent | prev | next [-] |
| > The use of lowercase throughout doesn't inspire much confidence either. I'm still surprised that people hang up on that in the big old 2026 And it's not a new thing either, like even writers in the typewriter age used it as a deliberate stylistic choice |
|
| ▲ | whatever1 7 hours ago | parent | prev [-] |
| I recently just prompted fable to make me an stl for a hobby of mine. You would be surprised by its success. |
| |
| ▲ | ryandetzel 6 hours ago | parent | next [-] | | Check out solidcraft. I spent the weekend with multiple codex sessions watching it build 3d prints for me. What's nice is I can use the tool with it to make my own changes like fusion 360 and so it's like a built in helper. Pretty slick | |
| ▲ | aaron695 6 hours ago | parent | prev | next [-] | | [dead] | |
| ▲ | varjag 6 hours ago | parent | prev [-] | | I did it with Codex once. The model didn't even bother to chamfer the edges but if you have no experience building physical stuff it still could come as a miracle. | | |
| ▲ | JimmyBiscuit 3 hours ago | parent [-] | | Just tell it to do that then. Im flabbergasted at how great claude is with 3d modelling and cad work now. If you have a proper skill set up its like magic. At least for smaller projects |
|
|