Remix.run Logo
Waterluvian 11 hours ago

Does it fit a standard 4x8 sheet flat with the tailgate down?

(Anyone seen detailed dimensions specs?)

pulvinar 9 hours ago | parent | next [-]

Not flat between the wheel wells (42.9"), but on top of them. There's a photo (don't know if it's real though).

https://www.slateforums.com/forum/threads/slate-truck-dimens...

gnabgib 10 hours ago | parent | prev | next [-]

Easily found: https://www.slate.auto/en/specs

Waterluvian 10 hours ago | parent [-]

None of that seems to answer my question.

RugnirViking 3 hours ago | parent | next [-]

the bed is listed as 5 feet long, and the entire truck a bit under 6 feet wide. so I don't think you can get something thats 4x8 feet to lay flat.

gnabgib 10 hours ago | parent | prev [-]

Detailed dimension specs are.. right there.

Your other question is about.. bed vibes? That's not a real spec (for any truck builder). You can put a 100x4 sheet rock in any 4'+ wide bed.. best of luck to the person behind you. Don't forget the red flag (day) or light (at night).. in north america.

otterley 7 hours ago | parent [-]

Only the bed length is listed there. It’s insufficient data to determine whether a full size sheet of plywood will fit.

cherry_tree 9 hours ago | parent | prev [-]

It seems like not quite.

The width is 50 some inches but the wheel wells are there so you may need some 2x4 or something to keep plywood from flexing over them. And the length of the bed isn’t near 8 feet so you’d need the bed open and the boards strapped in.

This jalopnik article had some helpful measurements: https://www.jalopnik.com/1845231/slate-pickup-bed-fit-every-...