> 20 milliseconds is barely distinguishable from a single 60 Hz sine wave period.

I've read that the newest PSUs are only guaranteed to last 12ms. Of course they may last much longer, especially if running near idle, but I'd prefer something that works well with any compliant device.

Here's one source: "Measured in milliseconds, hold-up time indicates how long a PSU can sustain its output within specified voltage limits after a loss or drop in input power. ATX 3.1 features a shorter hold-up time of 12ms, compared to ATX 3.0's 17ms hold-up time. This results in a small improvement in the PSU's efficiency." https://www.corsair.com/us/en/explorer/diy-builder/power-sup...

I haven't dug through the spec itself.