| ▲ | dlcarrier 2 hours ago | |||||||
I found it cheaper and much, much more convenient to get an adapter to refill the countertop carbonator's CO2 cylinders from a standard 20 lb CO2 cylendar. That way, you can carbonate from the much smaller and easier to use countertop unit, you can service multiple countertop carbonators from a single larger tank, and you can leave the larger tank shut off and away from living areas so that a leak doesn't pose a hazard. | ||||||||
| ▲ | foresto an hour ago | parent [-] | |||||||
> I found it cheaper and much, much more convenient Cheaper? I don't see how. We're filling from the same CO2 cylinders, and my total hardware cost was less than that of a midrange SodaStream without the adapter you describe. More convenient? Maybe, depending on environment and use. But mine has advantages, too: More fizz, no counter space required, fewer fragile plastic parts, standard components that are easily serviced/replaced, and the ability to carbonate liquids other than water without worry of backspray gumming up a countertop machine's internal components. (Your unit's instructions probably tell you to use only water, for this reason.) > you can leave the larger tank shut off and away from living areas so that a leak doesn't pose a hazard. I close my cylinder's main valve when it's not in use, and the two additional valves downstream of it (at the regulator and ball lock fitting) also work, so I think a leak is very unlikely. Even if there was one, I would expect it to be noticed quickly or else too slow for the released CO2 to cause harm. | ||||||||
| ||||||||