AC is less efficient than DC at a given voltage. The advantage of AC is that voltage switching is cheap, easy and efficient. Switching DC voltage is way harder, more expensive, and less efficient. However the switching costs are O(1) and the transmission losses are O(n) so for some distance (currently somewhere around 500 km) it's worth paying the switching cost to get super high voltage DC. The big thing that's changed in the last ~30 years is a ton of research into high voltage transistors, and fast enough computers to do computer controlled mhz switching of giant high power transistors. These new super fancy switching technologies brought the switching costs down from ludicrous to annoyingly high.

▲

arijun 6 hours ago | parent [-]

> AC is less efficient than DC at a given voltage

To expand on this, a given power line can only take a set maximum current and voltage before it becomes a problem. DC can stay at this maximum voltage constantly, while AC spends time going to zero voltage and back, so it's delivering less power on the same line.

	▲	adiabatichottub 4 hours ago \| parent \| next [-]
		Maybe if by "same voltage" we mean DC voltage the same as AC peak voltage. When we talk about AC voltage we are referring to root-mean-square (RMS) voltage. It's kind of like saying the average, though for math reasons the average of an unbiased sine wave is 0. Anyhooo, 1 VRMS into a load will produce the same power as 1VDC. If AC delivered less power than DC at the same voltage then life would be very confusing.
	▲	4 hours ago \| parent \| prev \| next [-]
		[deleted]
	▲	manwe150 5 hours ago \| parent \| prev \| next [-]
		That’s true, but my understanding is the main contributor is skin effect, since AC travels only on the surface of the wire, while DC uses the whole area, resulting in lower resistance loss (https://en.wikipedia.org/wiki/Skin_effect)
	▲	adgjlsfhk1 5 hours ago \| parent \| prev [-]
		this iirc is the smallest of 3 problems. the other 2 are skin effect (AC wires only store power on the outside of the wire) and capacitive effects (a write running parallel to the ground is a capacitor and AC current is equivalent to constantly charging and discharging the capacitor)