All of this was on a Bambu A1 Mini?

These are the types of things I want to print. My Ender 3 was so finicky, I only got a few out before I gave up.

_carbyau_ an hour ago | parent | next [-]

Yup, my Ender 3 Pro has had a lot of time and attention.

My Ender 3 Pro (and all it's upgrades and parts) will be given away for free shortly. It was great for learning/awareness of all the kinds of issues and details that modern 3D printers have solved.

Bambu has the reputation for "Just Works", but assumedly others are making significant progress too. Bambu printers by default are now largely linked to the Bambu online presence. Though "LAN only" modes, slicer workarounds, community firmware and such might get you what you want but do that research.

I was lucky my printer was offline when they sent the firmware update to require use of their slicer software. It will never go online again and I don't mind.

I don't want to tinker with the printer anymore. I want to just print things.

▲

jinushaun 8 hours ago | parent | prev | next [-]

I picked up a P1S for Black Friday. I’ve been printing non-stop since December, including some stuff I modeled myself. Only failed prints have been because I printed the wrong thing. It’s been flawless with PLA. Haven’t done PETG or ASA yet.

▲

otter-in-a-suit 11 hours ago | parent | prev | next [-]

I just got a Bambu P1S (they are / were on sale since the P2S came out) and the difference to my Ender 3 is truly night and day. I almost never used the Ender, since it always resulted endless tinkering and even then, the prints never came out well. The Bambu worked flawlessly out of the box.

	▲	Fomite 4 hours ago \| parent [-]
		The P1S is such a good printer.

▲

linsomniac 11 hours ago | parent | prev | next [-]

I had an Ender 3 Pro, and it was also very finicky, ~18 months ago I replaced it with a Bambu P1S and that thing is just a (nearly) fire and forget machine. I've been super happy with it. In the 18 months I've had it, I've probably gone through 10-20 rolls of filament, in the 4 years I had the Ender I went through maybe 3-4 (because every time I wanted to print something I knew I'd have to spend an hour fiddling with it). A coworker has the Ender 3 though and his has been reliable, so it seems YMMV.

▲

gambiting 10 hours ago | parent [-]

Ha, another Ender survivor here. I had the Ender 5 Pro for a few years, recently bought a Bambu H2D and it's like going from a bicycle to a car with heated steering wheel. It "just works" (it still has the classic 3D printing problems of edges of the print lifting up etc, but that's not the printer's fault). Vast majority of the time it just works.

▲

hagbard_c 6 hours ago | parent [-]

Which problems did you have with the Ender apart from the mentioned classic 3D printing problems? As I mentioned in an earlier comment I'm using one of these machines without too much trouble after fixing the mistakes made by a previous owner. I did put more capable firmware on the thing which improved printing speed - especially in the preparation phase - and to a lesser extent quality but even with the stock firmware it performed well enough with PETG and some complex models after dialing in the temperatures, distances and speeds to the somewhat odd filaments I use. I can send code directly to the printer, no SD card needed, I can follow printing progress in a browser and I don't send a single bit of information to the Creality mothership while doing so. The same is probably harder - but maybe not impossible, I haven't looked into this yet - with Bambu printers?

	▲	gambiting 5 hours ago \| parent [-]
		>>Which problems did you have with the Ender apart from the mentioned classic 3D printing problems? The kind of problems that could only be solved with a rather embarrasing amount of tuning every time I switched filament types or speeds or the temperature in my garage changed etc etc etc. Things that basically meant that every time I wanted to introduce any change I needed to print a new flow tower, new bridging tower, new temperature tower, the bed levelling took a huge amount of effort to install BL touch on it but it still worked....when it wanted to, with parts of the first layer being too close scraping the bed and others being far enough to not stick. Don't get me wrong - the Ender 5 could print as well as the H2D can, absolutely. But it would need 10 test prints and me pulling my hair out first to get to the same level of quality - which I have done, repeatedly, but I just lost the appetite for the tinkering. With the H2D I click print and the machine calibrates itself so well I actually feel bad for anyone who only ever experienced this and never had to sit down calibrating extruder steps or flow rates manually. (yes, old man yelling at clouds). >>and I don't send a single bit of information to the Creality mothership while doing so. The same is probably harder - but maybe not impossible, I haven't looked into this yet - with Bambu printers? Bambu printers, even with the most recent firmware allow Home Assist integration where you can monitor all print parameters remotely. But to be completely honest with you - I did go through a phase where I cared about stuff like this, now I just want it to work and be more like my dishwasher than like my bike, I want to tinker with the bike but my 3D printer should "just" work.

▲

brookke 12 hours ago | parent | prev | next [-]

It was indeed. Honestly, it’s been more reliable than any inkjet 2d printer I’ve owned.

▲

hagbard_c 6 hours ago | parent | prev [-]

I got a cheap Ender-3 V2 with a few modifications (extruder moved to the sled, CR-touch sensor mounted) which - after redoing the wiring which the previous owner somehow messed up, replacing some mismatched bolts, putting nuts and washers on the bolts underneath the hot plate, putting the springs in their correct locations, removing a metric ton of hot glue, aceton-glueing a few broken ABS details, installing more capable firmware [1] and tightening all bolts - seems to work just fine. Thus far I've only used PETG to print spare parts to repair broken appliances, this started out with some hiccups but works fine after installing the mentioned firmware. It isn't particularly fast, it isn't particularly pretty but it does work for my purpose: create parts to repair and build things. I have no doubt that a more modern printer can make life easier but thus far life hasn't been hard with this Ender: design a model, slice and dice it and send it to the printer which does the rest. I've printed some fairly 'hairy' models which came out fine (i.e. not hairy/thready) even though I'm using PETG. For those with some technical aptitude - in other words for people who are wont to build and repair stuff - these machines are an affordable step into the additive manufacturing world with the promise of 'spare parts at your fingertips'.

[1] https://github.com/mriscoc/Ender3V2S1