HA! I know we're not supposed to do "me too" posts, but literally the second I saw the headline I was thinking of the Technology Connections videos I've seen comparing thermoelectric to <anything else> and how inefficient it is in comparison. My memory is more than 2x, but I figure it's worth checking the videos to be sure before making an ass of myself.

But before that I figure it's worth it to check the comments already to see what people are thinking. And of course, your comment is at the top of the list.

Someone should code an "HN TC poster-bot" that scans headlines for topic matches and just immediately posts the relevant TC video. All of which to say, TC is awesome and everyone should check it out.

▲

hnuser123456 9 hours ago | parent [-]

Well, the thing is, heat pumps/compressors can be more than 100% efficient by using phase change, they can be "200-300% efficient". It's not clear that TEC will be able to do that, and they're currently around 5-10% efficiency.

They're good for active cooling phone holders, maybe a chilling cupholder or stuff like that. Novelty items where you have USB power and want to cool something maybe 10-20 degrees below ambient and can have a heatsink/fan on the hot side. You can stack them for a bigger delta T, but the efficiency drops even more, and you end up needing to use increasingly smaller modules on the cold side, so only good if you need to get something small and well-insulted down to very cold temps, not active cooling.

▲

Scoundreller 8 hours ago | parent | next [-]

When its cold enough outside and heat pumps need to turn on their resistive elements to keep your box warm enough, having something better than resistive would be nice.

better opex but may not overcome the capex cost.

▲

divan 8 hours ago | parent | prev | next [-]

What about NHL-sized ice arena using TEC? What's the theoretical limits/bottlenecks here? (asking for a friend)

	▲	analog31 8 hours ago \| parent \| next [-]
		Heat loss due to resistive heating of the thermoelectric elements is a factor. I do some work using TECs for cooling optical sensors. Most of the industry has settled on a very small range of materials, such as BiTe, meaning that we're probably at a plateau until a more efficient material comes along. Some of my applications are battery powered, and cooling consumes a fair portion of the total power budget, so a more efficient cooler would be welcome. Also, TECs are mechanically delicate. There's a laundry list of needs such as being able to form the material into the desired shapes, and make a good mechanical and electrical connection to it, which is usually done with some kind of low melting solder.
	▲	rcxdude 8 hours ago \| parent \| prev [-]
		It'll be ludicrously expensive to built, and then you'll also have a ridiculous amount of heat to get rid of. The main challenge will be keeping that from melting the ice again (this, in general, is the underlying issue with TECs: they don't have any means of stopping heat from flowing back through them, so it's a bit like trying to bail out a leaking boat, and it gets worse the larger the temperature difference you're trying to achieve. TECs max out their efficiency at a mediocre COP at very low temperature differences, in comparison to compressor based systems which can achieve better COP with more than 10x the temperature difference)

▲

sandworm101 9 hours ago | parent | prev | next [-]

10% efficient, without working fluids or moving parts, can be epicly more practical than 300% with those things. In very small or hard to reach places, peltiers are often only real option.

	▲	rcxdude 7 hours ago \| parent [-]
		Yeah, pretty much. I haven't seen a compressor-based cooler that's a few cm across. But it's not something that will replace AC, fridges, or freezers, which is where they get hyped in popular media. It's a niche technology for niche applications.

▲

adolph 8 hours ago | parent | prev [-]

> active cooling phone holders

Things I'd never think would exist much less that I would think of actual occasion for utility: my phone was in the sun (windshield), charging and performing wayfinding, resulting in "phone too hot" errors.

On the whole however, can someone explain how efficiency can be over 100%, if 100% represents conversion of inputs into all work and no entropy?

▲

sandworm101 8 hours ago | parent [-]

A 100w space heater will produce exactly 100w of heat. A 100w heat pump, properly installed, may turn that 100w of power into 300w of heat output on the hot side. This >100% language is marketing for people who do not understand thermodynamics or who dont want to bother with specifics.

The same is said of those scam "personal" AC devices that blow air over ice. They too are "more than 100% efficient".

	▲	hkt 8 hours ago \| parent [-]
		> This >100% language is marketing for people who do not understand thermodynamics or who dont want to bother with specifics. That is a little unfair: this is the language of economics rather than physics, so if you are paying for 100w and getting 300w, that is indeed over 100% efficient. SCOP is a more "correct" term but is less clear when communicating with the public and (IMO) is mostly for professionals or people with a technical understanding of heat pumps. Nobody thinks they defy the laws of physics though.