Those are some interesting connectors since they have a REAL RJ45 socket. Also interesting that they come prewired and not some assembly required like the ones from amazon do.

The pinout is also called a Yost Cable. You can read about it on https://yost.com/computers/RJ45-serial/ but its an interesting solution to converting DTE and DCE sides to using a standard port and cable. The downside is that the DIY adapters online need some soldiering to bridge the ground wires and more.

I do believe the DTE and DCE pinouts on the yost page are swapped though. I recently tested the pinouts of a Cisco DE-9 to 8P8C (DB-9 to RJ45) with a multimeter and came up with the DCE pinout instead of the DTE one. I then built an adapter with the DCE pinout to connect to my servers serial port and use them as a make shift null modem cable for terminal access.

If I would have know more about this 5 years ago while still at a previous employer, there was some old equipment that used an unknown pinout that would have gotten a DB-9 to RJ45 adapter slapped on it to change it to Cisco/Yost pinout. I was told not to loose the serial cable in the rack with the device because it was the only one that worked on it but never investigated more into it to find out if it was a straight through, null modem, or something else entirely.