▲ | dogma1138 3 days ago | |||||||
If you don’t have a massive amount of data to backup, used LTO5/6 drives are quite cheap, software and drivers is another issue however with a lot of enterprise kit. The problem ofc is that with a tape you need to also have a backup tape drive on hand. Overall if you get a good deal you can have a reliable backup setup for less than $1000 with 2 drives and a bunch of tape. But this is only good if you have single digit of TBs or low double digit of TBs to backup since it’s slow and with a single tape drive you’ll have to swap tapes manually. LTO5 is 1.5TB and LTO6 is 2.5TB (more with compression) it should be enough for most people. | ||||||||
▲ | Dylan16807 3 days ago | parent | next [-] | |||||||
> But this is only good if you have single digit of TBs or low double digit of TBs That's not so enticing when I could get 3 16TB hard drives for half the price, with a full copy on each drive plus some par3 files in case of bad sectors. | ||||||||
| ||||||||
▲ | sitkack 2 days ago | parent | prev [-] | |||||||
I have used LTO5 drives under FreeBSD and Linux. Under Linux I used both LTFS and tar. There was zero issues with software. | ||||||||
|